To learn more about the vehicle, please follow this link: http://used-auto-4-sale.com/104681345.html 2014 Jeep WranglerUnlimited Sahara Black Clearcoat Black, LEATHER, FRESH FORD SERVICE, FRESH PA. INSPECTION, ACCIDENT FREE HISTORY REPORT, and LOCAL TRADE. Mopar Premium Chrome Groupr SIRIUSXM , 40GB Hard Drive w/20GB Available, Body Color 3-Piece Hard Top, , Heated Front Seats, Integrated ...
Mopar 727 Auto Tranny for sale. Fits small block V-8 engine. I purchased this from a friend to use but went with a 904 in my setup. Was told that it had been gone thru with new seals. Included is a new inspect shield, Chrome pan which is installed. I've never used this tranny & can not guarantee it. It has always been stored inside.....not outdoors. $350 or best offer. Call or txt 276-235-5028
For Sale: Mopar B-Body 8.75 -- 8 3/4" rearend. It measures 54 7/8" from end to end. 44" center/center of perches. Axles are 4 1/2" bolt pattern. Ring gear is 3.23 ratio, includes the ratio tag & brake back plates also. $695 or best offer. Call or txt 276-235-5028
TOTALLY REBUILD 8.75 MOPAR THIRD MEMBER 742 CASE NEW POWER LOCK MOPAR POSI (SPICER POWER LOCK CLUTCH TYPE) NEW 3.23 GEARS (PERFORMANCE NITRO GEAR AND AXLE BRAND) BEARING AND SEAL KIT INSTALLED CASE CLEANED PRIMED AND PAINTED CHASSIS BLACK READY TO BOLT IN A GO FOR SUMMER FUN! J D RACE JIM 330 990 8155
1966 Dodge Charger, 440 Engine, 4 Barrel Carburetor, Factory 4-Speed, Sure Grip Rear. Basically an all original car. Been stored in a warehouse and do not have the time to drive. Running Good, Driving Good. I prefer phone calls only, please do not send text messages or emails. I have numerous other Mopars for sale such as: 1970 Plymouth Roadrunner, 1967 Plymouth Barracuda Notchback, 1965 ...
for sale is an old pair of original Mopar / Chrysler 8 3/4" rear axle shafts with the 4.5" inch bolt pattern, these both measure 31 7/16" over all width, $100 for the pair, will ship at buyer's expense, call (330)-784**6088, thanks!!
for sale is an old Carter BBD two barrel carburetor # 4297S from a 1967 Mopar / Chrysler / Dodge 383 big block V8 engine, the throttle blades move as they should, this unit has been stored indoors for a number of years since it was last used, J6 date code on the original 4297S id tag, $30 as pictured, will ship at buyer's expense in the US only, NO credit cards or Pay Pal, call (33O)-784-6O88 ...
This is a pair of front sway bars for 1972 through the 1980s Dodge 4x4 Power Wagon pickups and Ramchargers. One is about 1" diameter and the other is about 1 1/4" diameter. You will need new bushings. $20.00 each. Local pickup only. No shipping.
This is a pair (left & right) of new original factory front fenders for 1976 1977 1978 1979 Aspen Custom R/T & Volare Road Runner models. They show some minor shelf wear from years of storage. Inked on their backs is 4106604 and 4106605, which is their actual Chrysler Corporation part numbers. $500.00 for the pair. No shipping. Local pickup only.
This is a used bare 440 six pack intake. It is surface rusty from years of storage. I cannot read the casting date. $500.00. No shipping. Local pickup only.
for sale is an original Mopar OEM Hurst shifter box for a B-body application, the handle was torched off at the junkyard to aid in the removal of the A833 transmission way back in the day, $50 as pictured, will ship at buyer's expense, call (330)-784-6088, thanks for looking!!
This is a set of four used alloy wheels removed from a 1983 Ramcharger suv. There are probably several years of Dodge truck and Ramcharger applications. They are 15" X 8 1/2" with a 5 1/2" bolt circle. $150.00. Local pickup only. No shipping.
To learn more about the vehicle, please follow this link: http://used-auto-4-sale.com/104680673.html CARFAX 1-Owner, Excellent Condition, ONLY 2,803 Miles! $1,700 below NADA Retail! Heated Leather Seats, Onboard Communications System, iPod/MP3 Input, Dual Zone A/C, Keyless Start, ENGINE: 6.4L V8 SRT HEMI, Premium Sound System CLICK NOW!======KEY FEATURES INCLUDE: Premium Sound System, iPod ...
For sale is a new old stock Hurst shifter arm # 3894 for a Mopar / Chrysler 833 four speed transmission, this arm is found in the installation kit # 3734089 , yours for $20 and I will ship in the US only at buyer's expense for $6 by USPS flat rate small box, thanks!
For sale is a aluminum shifter mounting bracket for a 65-70 Mopar / Chrysler B-body 833 four speed transmission. It appears to have never been used and has shelf wear from sitting around, there is no part # stamped on this bracket. Priced at $35 as pictured, I will ship in the US only at buyer's expense and I do not accept credit cards or Pay Pal, thanks for looking!
for sale is an original Mopar / Chrysler 8 3/4" bolt on rearend pinion snubber, this works with A or B body applications, $40 as pictured, will ship at buyer's expense, NO credit cards or Pay Pal, call (330)-784-6088, thanks for looking!!
This is a pair of used M & H soft compound tires mounted with tubes on 4 1/2" bolt circle Mopar rally wheels. The wheels are either 14" X 5 1/2" or 14" X 6". The tires have some sidewall cracking, but were pretty like like that from nearly new. $200.00 for the pair. Local pickup only. No shipping.
To learn more about the vehicle, please follow this link: http://used-auto-4-sale.com/104493798.html PRICED TO MOVE $1,300 below NADA Retail! Clean. Sunroof, Navigation, Heated Leather Seats, Trailer Hitch, 26K LARAMIE LONGHORN EDITION CUSTOMER... 4x4, Heated Rear Seat, Bed Liner, Alloy Wheels, PWR SUNROOF, 3.92 AXLE RATIO READ MORE!======KEY FEATURES INCLUDE: Leather Seats, 4x4, Heated ...
For sale is a nice looking Edelbrock #7176 Mopar / Chrysler / Dodge 318 , 340 , 360 small block applications, it appears to have never been actually used on engine, very clean intake manifold, $200 as pictured. I will ship in the US only at buyer's expense, NO Pay Pal, thanks for looking!
for sale is a pair of old Mopar / Chrysler / Dodge 8 3/4" rear end axle shafts, these measure 31 7/16" in length each, exact application unknown, I would guess these are for a wide rear end assembly, most likely a C-body or Truck application, stock 4.5" bolt pattern, these should be good for narrowing to A-body dimensions, $75 for the pair, call (330)-784**6088, thanks!